
Add to Cart
OEM Temperature And Humidity Controlled Chamber Lab Test Machine
Usage :
This equipment is widely applied for electronic and electric products ,components and material by
constant high low temperature, temperature change ,cycling ,damp heat etc environment simulation
reliability testing.
Standard Features:
Testing Standard Compliance:
GB2423.1-2008(IEC68-2-1)Environmental testing - Part 2: Test methods - Tests A: Cold
GB2423.2-2008(IEC68-2-2)Environmental testing for electric and electronic products Test methods - Tests B:Dry Heat GB2423.3-2006(IEC68-2-3)Environmental testing for electric and electronic products - Part 2: Testing method test Cab: Damp heat Steady state
GB2423.4-2008(IEC68-2-30)Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat,cyclic ( 12h+12h cycle)
GB2423.22-2008(IEC68-2-14)Environmental testing for electric and electronic products-Part 2:Test methods-Test N:Change of temperature GJB150.3A-2009(MIL-STD-810D)High temperature test
GJB150.4A-2009(MIL-STD-810D)Low temperature test
GJB150.9A-2009(MIL-STD-810D)Damp heat test .
Technical parameter:
Mode | LY-280 | |||||
Inner Size W×H×D(cm) | 40×50×40 | |||||
Outside Size W×H×D(cm) | 45×155×95 | |||||
Volume (V) | 80 L | |||||
Temp and Hum Range | A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98% | |||||
Function | Fluctuation | ±0.5°C ±2.5%RH | ||||
Deviation | ±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH) | |||||
Controller Analytical Accuracy | ±0.3°C ±2.5%RH | |||||
Material | Inner Wall | #SUS 304 Stainless steel | ||||
Outer Skin | #SUS 304 Stainless steel | |||||
Heat Preservation | High temperature resistant, high chlorine acid b vinegar foam insulation materials | |||||
Wind Cycling Way | Centrifugal fan-broadband type forced air circulation | |||||
Refrigeration Way | Single stage compression refrigeration | |||||
Refrigerater | French Tecumseh | |||||
Refrigerants | R4O4A USA Dupont environmental protection refrigerant(R23+R404) | |||||
Condensing Way | Air-cooled or water-cooled | |||||
Heater | Nickel chrome heating wire heater | |||||
Humidifier | Semi-closed steam and wet | |||||
Water Suplying Way | Automatic cycling water supply | |||||
Standard Accessories | 1 Observe window(double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 clapboards, 1 bag of wet and dry bulb, 3 fuses, 1 power line. | |||||
Safety device | Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system |
Picture showing :