
Add to Cart
PVC Environmental Salt Spray Test Machine / Corrosion Resistance Fog Test Chamber
Product introduction:
The Salt Spray Test (Fog Test) is an accelerated corrosion test used to evaluate the relative corrosion resistance materials exposed to a salt spray or salt fog at an elevated temperature. Test specimens are placed in an enclosed salt spray testing cabinet or chamber and subjected to a continuous indirect fog or spray of a salt water solution. This climate is maintained throughout the duration of the test.
Design standard:
CNS:3627,3385,4159,7669,8886;JIS:D0201,H8502,H8610,K5400,Z2371;
ISO: 3768,3769,3770;
ASTM: 8117,B268.
Specifications:
Model: | LY-609-90 |
Inner Box Size (L×W×H) | 90×60×50 cm |
Outside Box Size(L×W×H) : | 114×88×128 cm |
Temperature Range : | 35°C~55 °C |
Temperature Fluctuations : | ≤±0.5°C |
Temperature Uniformity : | ±1°C |
Brine Temperature : | 35°C±1°C |
Spray Quantity : | 1.0~2.0 ml / 80cm2 / hr |
Lab Volume : | 270L |
Brine Tank Capacity : | 25L |
Power : | AC220V,10A |
Accessories : | Testing Salt/ Measuring tank/ Equipment each 1 set |
Equipment Material | Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board |
Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1°C Corrosion-resistant Testing Method(CASS)50±1°C |
Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1°C Corrosion-resistant Testing Method(CASS)63±1°C |
PH | Salt Spray Method (NSS ACSS6.5~7.2)Corrosion-resistant Testing Method(CASS)3.0~3.2 |
Multiple Safety Protection Devices : | Current discharge protection, over pressure protection,over temperature protection, over load fuse protection |
Customize parts:
1. Inner chamber size
2. Inner chamber structure
3. PID programmable controller or PLC touch screen controller