Dongguan Liyi Environmental Technology Co., Ltd.
As a high-tech environment equipment manufacturer,LIYI always keep in mind offer a wide range of equipment and solutions.
Add to Cart
Laboratory Plastic Rubber Testing Equipments , Rubber Testing Machine Automatic Calibration
before the production in bulk or used by small enterprise. Mill This machine is widely used in laboratory to do the test.
Rubber & Plastic Product factory for Natural Rubber Mixing(plasticating) are ofen used in this machine
Raw Rubber and Compound mixing,rubber warm-up mixing and pressing sheet.
Main Features:
The Laboratory Mixing Mill is just like mixing mills but it is smaller in size.
The rollers of laboratory mixing mill are made of cast iron rollers and
possesses a good surface hardness.
The rollers of laboratory mixing mill can be cooled by water and heated by steam inside,
or simply heated by electricity. The mill has low operating cost and low power consumption.
It is easy to install and its compact leaving space for maximum floor utilization.
1)Tailored structure, easy to operate.
2)There are many speeds and speed ratios available, which can satisfy most
customers’ formula and processing requirements.
3)Frame, frame cap and base, looking very nice, are welded and treated
by annealing for stress relieving.
4)Chilled alloy cast iron roll is abrasion resistant with long service life.
5)This Mill adopts special reduction gears,which make the machine have the
features of Low Noise,Samll Occupation of Land and so on.
Specifications:
| Mixing capacity | 0.1-0.5kg |
| Roller size | Φ120mm×L320mm |
| Roller spacing | 0-5mm adjustable |
| Rolling speed | 0-30r/min |
| Temperature range | Room temperature ~300℃ |
| Temperature accuracy | ±3℃ |
| Thermometer | RKC×2 |
| Heating method | Electric heating |
| Cooling method | Water cooled |
| Safety device | Emergency stop / Reversion device |
| Power | 7HP |
| Size(W×D×H) | 1000×550×1200mm |
| Power source | 3∮,AC380V,25A |
| Weight | About 360kg |
